What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Antisplat Cowling Door question

TJCF16

TJCF16

Well Known Member
Does anyone have a photo of exactly where they installed the door at on the cowling? I laid it up next to the cowling, not sure where to put it. The cowling seems to be more curved and the door flat. If I move it further aft and in board it seems better. I want to put it on the left side.
 
TJCF16 said:
Does anyone have a photo of exactly where they installed the door at on the cowling? I laid it up next to the cowling, not sure where to put it. The cowling seems to be more curved and the door flat. If I move it further aft and in board it seems better. I want to put it on the left side.
Click to expand...

...Move it as you say, inboard as far as possible, and to the rear edge of the honeycomb sandwich in the cowl. Thanks, Allan..:D
 
Finally Got The Courage To Cut The Cowl

Finally got the courage to cut the cowl, because I had too with constantly limping along with high oil temps. I so glad I did, problem solved.

KtUDupm39ens6Kzz9


KtUDupm39ens6Kzz9


https://photos.app.goo.gl/KtUDupm39ens6Kzz9
 
Last edited:
You must log in or register to reply here.
Back
Top