VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 02-13-2020, 10:46 AM
bjdecker's Avatar
bjdecker bjdecker is offline
 
Join Date: Jun 2005
Location: Georgetown, TX
Posts: 167
Default Dual Plasma III Behavior

I recently installed the Flight Data Systems L2E in order to instrument some of the ignition parameters of my Lightspeed Plasma III systems.

Install was pretty simple, and I'm able to now see the ignition advance on my Garmin G3X EIS screen.

I can see a <1 degree difference between ignitions at low power, increasing to 1.6 degrees at LOP cruise.

I've messaged Klaus but thought I'd ask this august body of knowledge and experience -- Has anyone else gone to the trouble? What does your data look like?

Cheers!
__________________
Brian Decker
Retired Firmware Guy and Airplane Builder

2018 RV-7 QB -- Built, Flying
2007 RV-7 QB -- Built, Drowned, Resurrected and flying
1998 RV-8 QB -- Started, Sold
1986 Mooney 205SE
1980 Mooney 231

Aided and abetted building a number of other RV's.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:58 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.