rightrudder
Well Known Member
I'm trying to get an idea of how large this area is, for access to plugs and such. Does anyone have a picture of wing root/fuselage junction with the gap fairing removed? Thanks!
I though I read that someone put fuel filters on each side in the wing root area. Looks like it would make servicing them a b..., er difficult.
I have finished wiring my wings with the Molex 150 waterproof plugs. After a lot of thought about point of failure, I figured if one of those plugs had a problem, I'd probably have to take my wings off to fix it because of the small gap.
I have reconsidered and now plan to rewire the wings with enough wire to pull through a hole in the fuselage and tie into a terminal strip under the floor pan as many others have done.
The fuel sender wire is not a problem because the gap is plenty wide in that area.