VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #11  
Old 12-05-2019, 07:13 PM
RViator60 RViator60 is offline
 
Join Date: Nov 2019
Location: Southport, NC
Posts: 14
Default

Looking at the 3M data sheet, if you have a cold shop that's difficult to heat, you may be able to achieve full strength in a relatively short time if you have access to a heat gun and a way to position it near the edges.
__________________
Marty Guinn
Based at KSUT, Southport, NC
- 1973 PA28-180 (N55087)
- RV14A - Started 9/19, Aft Fuse 95% complete
https://eaabuilderslog.org/?s=MartysRV14A
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:02 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.