Hi,
Building my RV14A (in the UK) and now making a seat mould out of blue foam to check dimensions and shape. When all OK I will be able to give this to an upholsterer to make the leather seats.
Just wondering about the actual position I should be. Currently my head is only an inch below the canopy and I do feel close to, and above the panel, although my leg length to the pedals appears OK.
I would appreciate any RV14 builders experience in seat design.
Currently there is no RV14 seat manufacturer in the UK, but many local upholsters who will make to dimensions (and a Foam Mould)
Regards John
Building my RV14A (in the UK) and now making a seat mould out of blue foam to check dimensions and shape. When all OK I will be able to give this to an upholsterer to make the leather seats.
Just wondering about the actual position I should be. Currently my head is only an inch below the canopy and I do feel close to, and above the panel, although my leg length to the pedals appears OK.
I would appreciate any RV14 builders experience in seat design.
Currently there is no RV14 seat manufacturer in the UK, but many local upholsters who will make to dimensions (and a Foam Mould)
Regards John