I ordered the empennage/tail kit for the RV-14a. Builder 140795. Now comes all the questions. I did order the AeroLED LN210. I see that they recommend ordering the electric elevator trim with the tail kit. I did not. Not sure what I need to order. Are there more than one options on the lighting kits?
Is the firewall forward kit part of the finish kit or is it a separate kit?
I am attempting to put a budget together. This is excluding freight/crating charges.
Tail kit - $4,525
Lights - $350
Electric Trim - Included
Wing Kit - $8,210
Lights - $800
Electric Flaps - Included
Fuselage Kit - $13,400
Electric Aileron Trim - Included
Finishing Kit - $13,400
FF Kit - $7265
Engine - XIO-390 - $34,500
Hartzell Model C2YR-1BFP/F74972 - $8,450
Spinner - (not needed)
Avionics Garmin IFR - $38,546 (Quote from Stein 1 G3X 10")
Interior - $6,500 (nice interior)
Paint - $12,500 (guess at this point)
Tools - $4,000 (Van's suggested number)
Misc - $2,500 (Van's suggested number)
Total - $152,076
I am hopeful to complete for $125k to $140k
More realistic $165,000
Am I close, Am I missing something?
Thanks
Is the firewall forward kit part of the finish kit or is it a separate kit?
I am attempting to put a budget together. This is excluding freight/crating charges.
Tail kit - $4,525
Lights - $350
Electric Trim - Included
Wing Kit - $8,210
Lights - $800
Electric Flaps - Included
Fuselage Kit - $13,400
Electric Aileron Trim - Included
Finishing Kit - $13,400
FF Kit - $7265
Engine - XIO-390 - $34,500
Hartzell Model C2YR-1BFP/F74972 - $8,450
Spinner - (not needed)
Avionics Garmin IFR - $38,546 (Quote from Stein 1 G3X 10")
Interior - $6,500 (nice interior)
Paint - $12,500 (guess at this point)
Tools - $4,000 (Van's suggested number)
Misc - $2,500 (Van's suggested number)
Total - $152,076
I am hopeful to complete for $125k to $140k
More realistic $165,000
Am I close, Am I missing something?
Thanks
Last edited: