Just wondering if anyone else had had a problem after updating to version 1.52 on their NGT-2000? I found that after updating, I lost all ADS-B In information. Upon further investigation, I noticed that when communication via the USB connection with MPC that the connection screen is now showing that it is connected to an NGT-1000 (no ADS-B in capability) and not the NGT-2000. This seems to be the root cause of the ABS-B loss. I'm in communications with the factory but just thought I'd see if anyone else has experienced this issue. If nothing else at least be warned that their might be an issue. I will post the fix when this gets resolved.
Bill
Bill
