What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Alternator installation Question: safety wiring

Stockmanreef

Well Known Member
can someone post how the bolts for the alternator are safety wired in place. I know how to do the one on the tensor arm where is connects to the engine, since that is shown in the plans. I was wondering about the one connected to the starter. Just safety wire to the bar it holds in place?
 
Our Alternator boss connection bolt head was not drilled, so no safety wire; just torqued to spec. For the bar that joins the Alternator and Starter, safety wire was installed through the bold head at the Starter and wrapped around the bar.
 
Back
Top