VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-14-2017, 01:00 PM
TShort TShort is offline
 
Join Date: Jan 2005
Location: Indianapolis, IN (KUMP)
Posts: 675
Default B&C Starter with Plane Power alternator - need bracket

Anyone know if there is an off the shelf bracket that fits between the B&C lightweight starter and the 60A PP alternator?

I'm installing the B&C starter during the upgrade to the panel, and the original steel bracket is nowhere close to fitting.

Thanks in advance.
__________________
Thomas Short
KUMP - Indianapolis, IN
RV-10 N316JS bought / flying
RV-8 wings / fuse in progress ... still
N329TS (had it, lost it, looking for new number)
Reply With Quote
  #2  
Old 11-14-2017, 01:22 PM
Chkaharyer99 Chkaharyer99 is offline
 
Join Date: Oct 2011
Location: Pilot Hill, CA
Posts: 871
Default

Yes. B&C offers two different sized brackets. I used one when installing the B&C starter on my IO-360 equipped with PP 60A alternator.

B&C Part Numbers: 403-304 for 1.794 inch spacing or 403-305 for 1.560 inch spacing.
__________________
Charlie
RV-8

Last edited by Chkaharyer99 : 11-14-2017 at 03:19 PM. Reason: PN
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:38 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.