Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-6/6A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 11-14-2017, 01:28 PM
Ralph Inkster Ralph Inkster is offline
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 299

900 hrs?
Spark- How is mag timing? Has the 500 hr mag inspections been performed?

Fuel- Any difference with & without boost pump on? Checked fuel primer lines and connections?

Carb- overhaul cost shouldn't be factored in, get it done!
One rare but possible cause- There is an old AD out on Marvel MA-4 carbs dealing with the lean mixture valve rotating in the bottom of the fuel bowl, although not applying to clone carbs, can happen as it did to me on a O-360. Depending on the valve movement in the fuel bowl housing, would either cause an over lean or over rich condition depending of throttle set & would either starve or flood the engine. The clone carb on my engine was a new AStar unit.
Maintain lots, upgraded & repaired some, modified more, rebuild a few, & built 4 of 'em
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 05:22 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.