I have a brand new Rotax still in its shipping box for my Rans. It was on the list.
Took about 30 minutes to remove the valve covers and check all the pushrods with a mirror and flashlight (because it was in the box) and button it back up. Didn't have to rotate the crank, there is enough of the pushrods showing to see the color of the tips. If the engine is mounted it will be easier.
All was good. The inspection is easy, if you have a wrong pushrods it is a different story.
Building Rans S-20 Raven 796S reserved
Going to the light side!
RV-6A 596S flying since '99 (Sold)
HP-18 5596S flying since '89
RV-10 996S tail, quick build wing and slow build fues., - dual Skyviews with complete system, two radio and not much else. Interior completely finished with Zolatone. CF plenum, interior complete. 1624 lbs, FLYING after a 21.5 month build.