VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 10-17-2017, 11:53 PM
Billythekid Billythekid is offline
 
Join Date: Jan 2016
Location: South California
Posts: 215
Default firewall penetrations

I am kit # 21952 a 6 fuse with a 7 firewall, I have dwg 19 rv7,9 and I see penetrations a b c and d on the prints, and their locations, I have the locations marked on the firewall and have checked 3 times to confirm. may I trust that all the locations for these holes is good to go or has anybody done something different, and I am going with a carb set up as this is my first build.
billythekid
Reply With Quote
  #2  
Old 10-18-2017, 06:05 AM
WingsOnWheels WingsOnWheels is offline
 
Join Date: Mar 2009
Location: Plano, TX
Posts: 1,292
Default

I have a O-360 RV-6A with the -7 firewall. don't have the plans in front of me to verify the b, c,& d values. However, I found the penetrations for the throttle, mixture, and cabin heat to be accurate per the plans.

That said, I had problems with the plans location for the firewall-mounted fuel-pump. The location placed the fuel-pump mounting bolt directly in line with the engine mount tube, preventing installation of the bolt. I ended up having to remove one of the nutplates and install the bolt from the front with a nut on the pump side. So pump maintenance is now a two-person job.

If you have the engine mount, I would check for clearance with the fuel pump mounting. If you don't have the mount yet, let me know and I can take some measurements to help. It may vary on the tail vs nose wheel mounts as well.
__________________
Colin P.
RV-6A #20603: Emp done,Wings done, Fuselage done, Electrical done, FWF about done, Canopy done, Fiberglass/Finishing in work. Getting very close!
PP SEL / A&P
N616CG (Reserved)
I donate every year on my B-Day (in Dec)
Reply With Quote
  #3  
Old 10-18-2017, 08:24 AM
Billythekid Billythekid is offline
 
Join Date: Jan 2016
Location: South California
Posts: 215
Default firewall stuff

I am looking for a mount and a motor, I have a deal coming together for the motor and I have contacted vans for mount and legs and have not committed to buying the mount from them as I know someone here will have a mount and legs come up for sale. I don't care if the mount is dynafocal 1 or 2, I figure which ever mount happens to come up for sale will be the direction I go... fun.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:52 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.