I'm getting to the tail end of my fuel tanks and to keep open the possibility of using mogas it would be wise to have a vapor return line. I'll be using a Rotec tbi so it's a low pressure fuel system.
According to 27 years of the Rvator this ideally should go back to one of the tanks, so needs to be dealt with before closing the tanks.
Using the search function hasn't found much (maybe the wrong search terms used), but would anyone be able to suggest some part numbers for fittings required at the tank, and while you are at it, at the point just prior to the carb/tbi?
Thanks in advance!
According to 27 years of the Rvator this ideally should go back to one of the tanks, so needs to be dealt with before closing the tanks.
Using the search function hasn't found much (maybe the wrong search terms used), but would anyone be able to suggest some part numbers for fittings required at the tank, and while you are at it, at the point just prior to the carb/tbi?
Thanks in advance!