Timberwild
Member
Before I start trimming my cowl, I would appreciate some feedback on how this looks. I have the upper cowling in place on the forward fuselage top skin and behind the spinner, but the angle of the spinner shroud looks weird. I?ve checked to make sure no obstruction is holding up the aft edge of the cowl, only resting on the firewall/top skin. No trimming has been done to the front of the cowling. Any thoughts on whether this is right or not? Thanks.
https://nam12.safelinks.protection....nSUIe+o5NVGOXPMZ8+mQnHOsjobql1aco=&reserved=0
https://nam12.safelinks.protection....nSUIe+o5NVGOXPMZ8+mQnHOsjobql1aco=&reserved=0