Page 42C-05 Step 1 Rev 04/03/14

Page 42C-05 Step 1 Rev 04/03/14 says to ?Machine countersink the AFT side of the F-00060 SV1000 Inst Panel Left? attach holes for AN426AD3 rivets.? Why?

I?ve already finished/installed this panel with the F-00061 Reinforcement Angle.

I can?t see a reason the c-sink anything on the AFT side.

Second paragraph talks about c-sinking the from side for the AN507C632R8 screws. I?m doing that now, but the instruction about the AFT side has me puzzled.

Maybe I?ve missed something in an intervening revision? Any assist/clarification will be much appreciated.

Thanks!

Dave.

I don't have a copy of those drawings here to look at, but keep in mind that aft side is not relative to you sitting in the seat looking at it, it is relative to the front/ back of the airplane. So, aft side is the side you see when in the seat.

That explains it!

Thank-you so much Scott!
That's what happens when I stand "too close to the trees".

Dave