Stockmanreef
Well Known Member
I prefer to not screw this up. On the WH-00125 wiring diagram for the Tailcone Left it shows the wiring of the 4 pin connector for the ACK-ELT (RS-232 DIN connector).
So here is the stupid question:
It shows the pin diagram but not which side one is looking at. Am I looking at the side with the pins you solder on to? Or the plug side (finished end).
I did look up the pin diagram on Mouser and that shows it from the front of the plug, so the pins are in the back.
thanks
ken
So here is the stupid question:
It shows the pin diagram but not which side one is looking at. Am I looking at the side with the pins you solder on to? Or the plug side (finished end).
I did look up the pin diagram on Mouser and that shows it from the front of the plug, so the pins are in the back.
thanks
ken