LettersFromFlyoverCountry
Well Known Member
Stopping so I don't do something stupid. Need clarification on Section 21iS/U-03 step 3 which tells you to rivet F-01221-R-1 to the floor, F-01224-R-1.
Step 2 says dimple the two #30 holes but says nothing about the #40 holes in the ribs.
That's significant because 21IS/U-02 tells you in step 4 to dimple those holes in the floor.
Those dimples can't be accommodated in the rib. But there is no instruction I see to do so..
That would be very un-Vanslike so I'm missing something. What is it?
Step 2 says dimple the two #30 holes but says nothing about the #40 holes in the ribs.
That's significant because 21IS/U-02 tells you in step 4 to dimple those holes in the floor.
Those dimples can't be accommodated in the rib. But there is no instruction I see to do so..
That would be very un-Vanslike so I'm missing something. What is it?