What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Rv-10 stiffener question

PrescottB787

Active Member
Placement off stiffener F-1047E-L and F-1047E-R question. Is he aft end of the stiffeners resting on the left and right aircraft skin or the Aft Bottom Skin F-1079. If it rests on the Aft Bottom skin there is a gap between the skin and stiffener. If it rests on the side aircraft skin there is a gap where the Aft Bottom skin meet the right or left side aircraft skin. Hope someone understand what I just ask😂😂. Page 10-8 figure 2 and 3 if I helps.

Thanks so much for any help
 
I just looked at mine. The J channel, F-1047E, is resting on the F-1011 bulk head tab, then the F-1079 skin is on top of that, followed by the F-1073 side skin. Let me know if you need a picture, I have a few but they didn't come out to well.

Lynn
 
Back
Top