Help (Steve? )
I have a brand new G5 installation with GMU 11 and GAD 13, wired as the book shows, with G5 at one end and GMU 11 at other with Gad 13 wired in between.
Everything appears to be happy can bus wise, but with the Davtron C307PS on pins 4 and 5 I get nothing. Well, I get the red X on pfd screen and get INVALID on the diag screen.
Power out on pin 5 to white ?+? on probe. Return on 4 from white/blue on probe. Probe shield is connected (grounded) through connection at Shell and I verified ground lug on probe (mounted in plastic cover) has continuity to ac ground.
I had one slightly unseated pin on my GMU 11 install, so I?ve checked and double checked all that...now I?m just about to lose my mind. I bought the factory Davtron probe because I didn?t want to frustrate myself with fabricating one!
Thanks for any thoughts you guys have!
I have a brand new G5 installation with GMU 11 and GAD 13, wired as the book shows, with G5 at one end and GMU 11 at other with Gad 13 wired in between.
Everything appears to be happy can bus wise, but with the Davtron C307PS on pins 4 and 5 I get nothing. Well, I get the red X on pfd screen and get INVALID on the diag screen.
Power out on pin 5 to white ?+? on probe. Return on 4 from white/blue on probe. Probe shield is connected (grounded) through connection at Shell and I verified ground lug on probe (mounted in plastic cover) has continuity to ac ground.
I had one slightly unseated pin on my GMU 11 install, so I?ve checked and double checked all that...now I?m just about to lose my mind. I bought the factory Davtron probe because I didn?t want to frustrate myself with fabricating one!
Thanks for any thoughts you guys have!