TomSpencer46
Active Member
In fitting cabin cover to the fuselage the rear top skin overlaps the recess about 1/16 of inch all I can think of is to use the dremel to grind the fiberglass back. Any Ideas? The Harken canoe lift works great lifting the cover on and off making it a one man job
https://www.dropbox.com/s/e9l28j24n1f2eq1/IMG_20170429_145100593.jpg?dl=0
https://www.dropbox.com/s/8e8xuzu3tyfxcyj/IMG_20170429_145008324.jpg?dl=0
https://www.dropbox.com/s/8u2z863l1q2exuv/IMG_20170424_134939395.jpg?dl=0
https://www.dropbox.com/s/e9l28j24n1f2eq1/IMG_20170429_145100593.jpg?dl=0
https://www.dropbox.com/s/8e8xuzu3tyfxcyj/IMG_20170429_145008324.jpg?dl=0
https://www.dropbox.com/s/8u2z863l1q2exuv/IMG_20170424_134939395.jpg?dl=0