Anyone else have trouble with the two aluminum strips that are supposed to seal up the gap on the underside of the horizontal stabilizer? I think the plan is to trim these so that they butt up against the underside of the stab.
My problem is that the especially toward the front but most of the way down one side the stabilizer skin the skin doesn't actually overlap the fuselage. Maybe a pic would help, but essentially the fairing piece sits inside the edge of the stabilizer instead of under it.
Anyone else have trouble in this area or have some suggestion about what to do about it?
My problem is that the especially toward the front but most of the way down one side the stabilizer skin the skin doesn't actually overlap the fuselage. Maybe a pic would help, but essentially the fairing piece sits inside the edge of the stabilizer instead of under it.
Anyone else have trouble in this area or have some suggestion about what to do about it?