jamcgee1978
Active Member
Riveting the leading edges have noticed as I?m setting the rivet they are having a tendency to bend ever so slightly the j channel causing a lift of the edges from the skin. Although the rivets have set correctly I understand this is just the rivet pan causing this.
Any of you folks have any home builder solutions to minimise this at all.
Thanks in advance from an Autumnal Scotland.
https://jamesmcgee.smugmug.com/RV10/i-rLGWR8Q
Any of you folks have any home builder solutions to minimise this at all.
Thanks in advance from an Autumnal Scotland.
https://jamesmcgee.smugmug.com/RV10/i-rLGWR8Q