grayforge
Well Known Member
While mounting the IBBS, I removed the bottom/mounting plate to more easily match drill to my subpanel. So I decided to take a peek inside.
The battery is pretty big. I'm guessing it'll drive equipment for quite a while. It's significantly heavier than my 12ah EarthX LiFePo battery: 2.1lbs vs 1.3lbs
The original plan was to use the EarthX along with a circuit of diodes and a resister for charging and isolation, but I decided to go turn-key.
The battery. Nice unit.
Bottom removed. Mostly battery
8 pretty hefty cells in 2 banks of 4
Pretty complicated circuitry
The battery is pretty big. I'm guessing it'll drive equipment for quite a while. It's significantly heavier than my 12ah EarthX LiFePo battery: 2.1lbs vs 1.3lbs
The original plan was to use the EarthX along with a circuit of diodes and a resister for charging and isolation, but I decided to go turn-key.
The battery. Nice unit.
Bottom removed. Mostly battery
8 pretty hefty cells in 2 banks of 4
Pretty complicated circuitry
