Noticed a shimmy recently with our 7A at low speed during landing rollout.
Checked the tire pressure and it was low so added air and rechecked. Shimmy was much reduced but still present.
Lifted the nose off the ground and noticed lateral slop side to side when pushing on the tire.
Does the WD-630-1 fork have bearings ? Also noticed that I cannot buy a fork from Van's. Is there an aftermarket source ?
Thanks
Kevin
Checked the tire pressure and it was low so added air and rechecked. Shimmy was much reduced but still present.
Lifted the nose off the ground and noticed lateral slop side to side when pushing on the tire.
Does the WD-630-1 fork have bearings ? Also noticed that I cannot buy a fork from Van's. Is there an aftermarket source ?
Thanks
Kevin