VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 09-14-2017, 12:10 PM
PrescottB787 PrescottB787 is offline
 
Join Date: Dec 2016
Location: Houston Texas
Posts: 25
Default Rv-10 stiffener question

Placement off stiffener F-1047E-L and F-1047E-R question. Is he aft end of the stiffeners resting on the left and right aircraft skin or the Aft Bottom Skin F-1079. If it rests on the Aft Bottom skin there is a gap between the skin and stiffener. If it rests on the side aircraft skin there is a gap where the Aft Bottom skin meet the right or left side aircraft skin. Hope someone understand what I just ask😂😂. Page 10-8 figure 2 and 3 if I helps.

Thanks so much for any help
Reply With Quote
  #2  
Old 09-14-2017, 01:14 PM
Lynnb's Avatar
Lynnb Lynnb is offline
 
Join Date: Jan 2014
Location: Cedar Hill, TX
Posts: 175
Default

I just looked at mine. The J channel, F-1047E, is resting on the F-1011 bulk head tab, then the F-1079 skin is on top of that, followed by the F-1073 side skin. Let me know if you need a picture, I have a few but they didn't come out to well.

Lynn
__________________
RV-10 in Process
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:04 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.