Fearless
Well Known Member
I was hoping to have already done my first flight but I can't seem to get over the hurdle. My last issue seems to be air in the lines of my brakes. I have tried various methods to try to push fluid in to the reservoir from the calipers and have had some success. What I am seeing now is air between the lines running from the pilot master cylinders to the passenger side(the high point in the loop of the lines). I have searched the forums for some advice but getting a mixed opinion if this is really an issue or not. I put an overflow can from the reservoir for the fluid to go in and I get fluid there but still haven't been able to get the air out between the master cylinders. My brakes feel solid but I want the air out to feel total confidence in them. Before I purchase another bleeder method just looking for some current feedback.