Getting ready to start buliding the fueslage jig, setting bulkheads and thinking about using the actual wings instead of a spacer at F303. I have plenty of room in my basement to do this. Would eleminate the need for a spacer at F303 and not have to worry about alignment or edge distances at the rear spar F305.
Wing alignment to a string center line down the center of the fuselage would make for very accurate alignment to reference points on the wings. Plan on using a laser level to keep level grade and wing chord alingment
I have read many posts on this site but never anything like this.
If feedback is not too negative plan to go for it.
I build alot of post frame buildings on a daily basis and know this is how my crew would tackle this construction.
Feedback and comments always appreciated.
Wing alignment to a string center line down the center of the fuselage would make for very accurate alignment to reference points on the wings. Plan on using a laser level to keep level grade and wing chord alingment
I have read many posts on this site but never anything like this.
If feedback is not too negative plan to go for it.
I build alot of post frame buildings on a daily basis and know this is how my crew would tackle this construction.
Feedback and comments always appreciated.