Jim Cone's fuselage pictures 2-1-2009

Here are the latest pictures of my RV-12.

http://picasaweb.google.com/JimCone1941/RV12Construction212009#

Everything went well, again no problems. Just be sure not to rivet any skins when you attach the aft baggage bulkhead. Also, mark the holes on both sides that do not get rivets yet. I use blue tape over the holes. (I marked the hole on the back and then riveted one of them from the other side. I had to drill it out.) It is easy to read the instruction and then forget when you actually get working on that part.

Thanks for the photos Jim. Are you going to final paint the roll bar before you install the plexiglass? Slane

Slane said:

Thanks for the photos Jim. Are you going to final paint the roll bar before you install the plexiglass? Slane

Click to expand...

I'm not sure what I am going to do.