Gentleman,
When I have the motor running and electricity running through the gauges. When I push the PTT button on both pilots the amp, the EGG and HTG needle peg. Know that it is grounding the gauge needle, when I release PTT the gauges will return to the right position, the gauges are hooked up properly per van instructions, and the PPT is wired properly . All wiring to my Dynon , Icom radio and intercom was pre-wired by APPROACH. everything works except this proplem
If you have a solution, please drop me a line
please E mail me at [email protected]
or contact me on 540 312 6279 text or call
Bev Long
When I have the motor running and electricity running through the gauges. When I push the PTT button on both pilots the amp, the EGG and HTG needle peg. Know that it is grounding the gauge needle, when I release PTT the gauges will return to the right position, the gauges are hooked up properly per van instructions, and the PPT is wired properly . All wiring to my Dynon , Icom radio and intercom was pre-wired by APPROACH. everything works except this proplem
If you have a solution, please drop me a line
please E mail me at [email protected]
or contact me on 540 312 6279 text or call
Bev Long