Yes, major pain. Make sure the bottom flanges on both bulkhead are bent perfectly and fit the bottom skin. I removed and replaced them lots before they fit right. Seems like I had to buy a new set too.
Estes Park, CO
wirejock at yahoo dot com
Donated 12/27/2018. Plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.