Originally Posted by JohnInReno
I used fuse blocks for the main bus and mounted them on a swing down panel on the passenger side.
I did basically the same thing. I used smaller ones, a total of (5) 6 port fuse panels. I have them on both sides, hinged under the panel. This allows me a little more room to get by (if needed) to other "behind the scenes" work.
"Pilots: Looking down on people since 1903"
RV-9, N556RM, O-320, Dual PMags, Catto 3 blade.
100% finished - FLYING
Mosquito XEL kit in garage waiting to be built.