VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #111  
Old 06-08-2018, 10:32 PM
Driftdown Driftdown is offline
 
Join Date: Jan 2011
Location: Clearwater, Florida
Posts: 330
Default

Quote:
Originally Posted by YellowJacket RV9 View Post
I just installed the echoUAT/SafeFly combo from GRT today. Installation was straightforward and took about 4 hours, counting a trip to Lowes to buy some 8-32 flush head screws for mounting. That also included building two RG400 antenna cables since I messed up the length of the first one. The ADS-B antenna was mounted by the left gear mount, withe GPS antenna on the glareshield.

Took another 30 minutes of looking at both GRT and uAvionix instructions to get all the settings properly configured. I have a single Sport SX EFIS.

I went for a test flight and the report showed all good except 100% Fail for Flight ID. The instructions had stated that this should be left blank, however the FAA seems to want this to be the same as the N-number for GA aircraft. I will make this change tomorrow and see how it works.

The IN portion works great and I have traffic and weather on both my EFIS and foreflight. An added bonus was that it supplies position data to the iPad so I can ditch my bluetooth GPS unit.

Chris
Great!
Thank you Chris, for the writeup.
Reply With Quote
  #112  
Old 07-11-2018, 05:26 PM
BigJohn BigJohn is offline
 
Join Date: Nov 2008
Location: Gloversville, NY
Posts: 1,509
Default Finally got my install done!

Since I started this thread it seems to have generated quite bit of interest! I thought it only fair that I give some feedback on my own install experience. I mounted the echoUAT unit on the baggage compartment aft bulkhead, so that the little indicator lights are visible. The UAT antenna went on the belly directly below, and the GPS unit went above. I ran a single wire from the avionics bay down through the tunnel for power. The power wire was spliced into the feed to the transponder. So far the 7.5 amp fuse for the avionics is holding up just fine with the extra load.

First flight was today, in a marginal ADS-B area, and the performance report was good in all respects except for a high failure rate in baro-altitude. Next flight will be Friday and I will make it a point to do it in a better coverage area. If baro-altitude is still problematic I will have to contact tech support for help. More after Friday’s flight.
__________________
John Peck, CFII, A&P, EAA Tech Counselor, Flight Advisor.
RV-12 N37JP 120176 Flying since 2012.
VAF paid through 10/2018. Best bargain in town.
Reply With Quote
  #113  
Old 07-11-2018, 05:49 PM
Piper J3's Avatar
Piper J3 Piper J3 is offline
 
Join Date: Nov 2014
Location: Hinckley, Ohio
Posts: 932
Default

John - see my posts starting #34... http://www.vansairforce.com/communit...=161129&page=4
__________________
-
Jim Stricker
Hinckley, Ohio
PPL/ASEL 1970 Sport Pilot since 2004
80 hrs Flying Aeronca Chief 11AC
1130 hrs Flying 46 Piper J-3 Cub
RV-12 E-LSA #120058 AWC Jul 2012 - Bought Flying Oct 2015 with 48TT - Hobbs now 370

LSRM-A Certificate 2016
Special Thanks to EJ Trucks
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.