If I remember correctly, that is a part that comes in the wing kit. Easiest way to go would probably be to see if you can order one from Vans while waiting for your QB wings to arrive.
As to the flap actuation rods, they fit snug, but with a little bit of a twist and a touch of boelube they went through the blocks. I was mightily impressed when they lined up perfectly when the rod was finally installed from the outside. Though they were snug, there was no binding or anything when I tested them with the flap motor.
RV-14A Kit 294
Empennage Started 5/23/16 - Comp. except fiberglass
Wings - 95%
Fuse - 98%
Last edited by YoVuelo : 06-30-2018 at 08:10 PM.