Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 06-23-2018, 03:26 PM
magiccarpet's Avatar
magiccarpet magiccarpet is offline
Join Date: Feb 2013
Location: Switzerland, Europe
Posts: 171
Default Control surface deflection limits / reports

Hi all
For our national regulatory acceptance proceudre I need to indicate nominal values and tolerances of the control surfaces of the RV-12. To my surprise I can't find any indication neither in the KAI, nor in the PAP from Van's.
I measured all deflection angles on my plane and would like to verify if they are within limits.
Any help on this or pointers are greatly appreciated.
If you like, post the measurements of your control surfaces here in this thread, so that I can get a feel if my values are among yours.
Thank you very much.
Chris, RV-12 S/N 120832, HB-YSC


=VAF= dues paid for 2019
Reply With Quote
Old 06-23-2018, 06:06 PM
rgmwa rgmwa is offline
Join Date: Feb 2010
Location: Perth, Western Australia
Posts: 1,625

Post #19 in this thread has some useful information for one aircraft anyway.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 09:19 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.