VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-08-2018, 04:16 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 577
Default Firewall penetration question

With the fm150 should all the cables come through the middle penetration? Or does the governor go through the left? Or?

Do the cylinder and egt temp lines run best thru middle or left? Same question for red cube? My GEA24 is on the left sub-panel
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
  #2  
Old 06-08-2018, 05:03 PM
Mark33 Mark33 is offline
 
Join Date: May 2010
Location: Baton Rouge, La.
Posts: 259
Default P.M.

I just sent you a P.M.
Reply With Quote
  #3  
Old 06-09-2018, 12:59 AM
JHartline JHartline is offline
 
Join Date: Dec 2012
Location: Carrollton, GA 5GA2
Posts: 176
Default

I routed the control cables as depicted in the plans. Using the mounting bracket from Airflow the cable lengths are correct. See a related thread about how to mount the bracket if you havenít done that part yet.

My GEA24 is on the right subpanel. I split the EGT & CHT into two bundles, motor right and left, and ran them through the openings on their respective sides. I would think thereís plenty of wire length to do it however it works best for you. I believe I ran my fuel flow wire through the left side.
__________________
James Hartline
Carrollton, GA 5GA2
RV-14 - Finish and FWF in progress
T-Bolt IO-390
Maule MX7-180
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:19 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.