What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Rv14A aileron

Dennis Harm

Active Member
Hi everyone,need some help. Page 22-09 step 4 has you remove trailing edge as shown in fig. 1 the A-1011-1 trailing edge, then complete riveting the aileron, does the A1011-1 trailing edge not get riveted between the top and bottom skin? Thanks Dennis
 
go to section 5.8 and read the detailed explanation of putting back in the trailing edge and riveting. The trailing edge is removed temporarily to glue it in place with double sided tape. i don't remember the exact details, but I don't recall it hard to do.

hope this helps
 
That?s what I thought Ken . Had a screw up on another part and didn?t want to mess up another one, thanks for the reply Dennis
 
Back
Top