What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Anyone know hole spacing for ASA air oil separator?

L

lr172

Well Known Member
I forgot to order this and want to put some holes / nutplates in the firewall before I mount my top skin tomorrow. Hoping someone may have one lying around they could measure for me. Looking for the CTR to CTR spacing of the two holes in the mount plate.

I sent ASA an email, but don't expect a return until Monday.

Larry
 
Had to wait to get to my hangar. My mounting bracket for the separator has 2 holes vertically with CTR to CTR = 1 1/4?. (1.25?). I used AN4 bolts with nut plates mounted behind the firewall. Which sounds like what u are doing. I got my separator from Allan back in 2015. YMMV. But hope it?s the same.
 
pilotkms said:
Had to wait to get to my hangar. My mounting bracket for the separator has 2 holes vertically with CTR to CTR = 1 1/4?. (1.25?). I used AN4 bolts with nut plates mounted behind the firewall. Which sounds like what u are doing. I got my separator from Allan back in 2015. YMMV. But hope it?s the same.
Click to expand...

Thanks so much for the assist. I really appreciate it.

Larry
 
You must log in or register to reply here.
Back
Top