I'll be calling for advice from Van's on this in the morning, but wondering if anyone has had problems fitting snorkel due to interference with intake pipe on Cylinder #3?
I test fit today after installing the aft and forward baffles. Even removing the air filter frame and trying to more or less force it into position the snorkel and frame won't align well enough to avoid interference with intake pipe. I haven't even mounted the FM-150 servo yet, just wanted to get a sense of how the snorkel fitting process will be.
Photos on latest blog post (link in signature). Any advice/experience appreciated. My engine is a Thunderbolt but should be standard IO-390.
Thanks in advance.
I test fit today after installing the aft and forward baffles. Even removing the air filter frame and trying to more or less force it into position the snorkel and frame won't align well enough to avoid interference with intake pipe. I haven't even mounted the FM-150 servo yet, just wanted to get a sense of how the snorkel fitting process will be.
Photos on latest blog post (link in signature). Any advice/experience appreciated. My engine is a Thunderbolt but should be standard IO-390.
Thanks in advance.
Last edited: