Gascolator nutplate

P

PMLviator

Active Member

• May 14, 2014

• #1

22-02 step 3 fig.4 does not show what size nutplate and rivet to use. Am I missing something in reading the drawing?

 

B

BigJohn

Well Known Member

• May 14, 2014

• #2

Could be wrong, but I don't think that nutplate is installed in this section.

 

M

Mich48041

Well Known Member

Friend

• May 14, 2014

• #3

My 22-02 step 3 refers to figure 1, not figure 4.
Joe Gores

 

P

PMLviator

Active Member

• May 15, 2014

• #4

O.K. my rev.4 say's, callouts as per fig.1 and fig.4. Went ahead and found step 3 on 28-05 which calls for AN3-7, so I guess K1000-3. thanks.

 

J

Jamesey

Well Known Member

• May 15, 2014

• #5

See 22-03 step 11.

 

P

PMLviator

Active Member

• May 15, 2014

• #6

gascolator nutplate

YEP, there it is, steps 10, 11, 12. Thanks.