VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #11  
Old 02-05-2019, 07:01 AM
AirHound AirHound is offline
 
Join Date: Oct 2006
Location: OFallon IL now, everywhere before
Posts: 272
Talking

Quote:
Originally Posted by RFSchaller View Post
Andrew, I had my carbs overhauled at about 500 hours.

Rich
Rich, nice getting all those hours in, dang that’s roughly 95 bbl of gas. They’re making overtime in Houston to keep up with the demand. Good on ya!

Not sure if Bing auto adjusting capability is less effective at your higher MSL with time in service than here at 500 MSL. What design parts have wear factors that allow it to auto adjust?
__________________
Doug
Reply With Quote
  #12  
Old 02-05-2019, 11:43 PM
RFSchaller RFSchaller is offline
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 2,411
Default

Andrew,

The west coast shop who overhauled my carbs did replace the needles and floats, but frankly I was not happy with them. They managed to swap my right and left choke assemblies which made starting almost impossible. Took me a few hours to figure it out and swap them back. As Gomer would have said, “SHAZAM, now it works!”

Rich
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:38 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.