Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Static port
- Thread starter Rdwrv4
- Start date
David Paule
Well Known Member
One of the two SK-54s
Had to look that one up, Robin! It's not in the plans - it's in the manual.
It's on SK-54, which shows it to be centered vertically and 18 inches forward of the inboard edge of the leading edge of the horizontal stabilizer. At least that's how I interpret it.
Also, there's another SK-54, that one for a detail of the forward canopy, just to add to the confusion.
Dave
Had to look that one up, Robin! It's not in the plans - it's in the manual.
It's on SK-54, which shows it to be centered vertically and 18 inches forward of the inboard edge of the leading edge of the horizontal stabilizer. At least that's how I interpret it.
Also, there's another SK-54, that one for a detail of the forward canopy, just to add to the confusion.
Dave
I can confirm that is the drawing we used on ours, and it calibrated very well.
ppilotmike
Well Known Member
Good job
David,
Well done, on the quick response. Also, thanks to Paul and others for staying active in the "good 'ol RV-3" forum, even though you're flying and there aren't too many people building 3s..
David,
Well done, on the quick response. Also, thanks to Paul and others for staying active in the "good 'ol RV-3" forum, even though you're flying and there aren't too many people building 3s..
