Xkuzme1
Well Known Member
Hey folks. Id like to see if anyone has any ideas for how to install this radio with a PTT switch. It is a Flight Line 760 (FL-760). This radio has a specific diagram for installing it with a SPA-400 Intercom... which is what I have.
My current setup is:
SPA-400
single com - KLX-135a with PTT switch.
Id like to install this FL-760 with no audio panel. I want to have two different PTT switches on my stick so that I can talk on either one at the same time.
If I install it like it says (paralleling) the radios then the PTT would be broadcasting both radios simultaneously.
Thanks in advance.
Todd
here is a link to the install sheet
https://www.sigtronics.com/_pdf/air_pdf/air_intercom_pdf/SPA-400_Flightline_FL-760_Inst.pdf
My current setup is:
SPA-400
single com - KLX-135a with PTT switch.
Id like to install this FL-760 with no audio panel. I want to have two different PTT switches on my stick so that I can talk on either one at the same time.
If I install it like it says (paralleling) the radios then the PTT would be broadcasting both radios simultaneously.
Thanks in advance.
Todd
here is a link to the install sheet
https://www.sigtronics.com/_pdf/air_pdf/air_intercom_pdf/SPA-400_Flightline_FL-760_Inst.pdf