What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

ECI Taper fin cylinders

F

famber

I'm New Here
Has anyone had any experience with the ECI line of experimental cylinders? I had some ring seating problems and was wondering if I was the only one?
 
Ring seating problems have to do with the hone crosshatch and surface roughness numbers (Ra, Rk, Pk etc.). Has nothing to do with the fins on the barrels.
 
No problems with the RV-8 in my avatar. The compression rings seated well within the first couple hours and oil consumption stabilized after about 50.
 
No issues, that I am aware of.
Good Luck,
Mahlon
"The opinions and information provided in this and all of my posts are hopefully helpful to you. Please use the information provided responsibly and at your own risk."
 
You must log in or register to reply here.
Back
Top