Champ
Well Known Member
I mocked up my reg marks according to the Transport Canada CAR. A 12" high mark on the fuselage negates the need for 20" under the wing but it's just way to big appearance wise. I would like to put a 6" on the tail but it would be a tight fit if done to the CAR. I would like to avoid putting the 20" on the wing. Marks will be done in vinyl.
Questons are:
1. Has anyone got away with 6" on the fuse or tail without the 20" on the wing?
2. Can you get away with bending the CAR rules wrt letter spacing, letter width, hyphen length? Probably need to do this to get 6" to fit on the tail.
3. Anyone got away with "special effects" like shading?
Back to painting.
Questons are:
1. Has anyone got away with 6" on the fuse or tail without the 20" on the wing?
2. Can you get away with bending the CAR rules wrt letter spacing, letter width, hyphen length? Probably need to do this to get 6" to fit on the tail.
3. Anyone got away with "special effects" like shading?
Back to painting.