sbal0906
Well Known Member
So after finally successfully dimpling the aft holes in the R-903 rudder tip rib, I couldn't shake the feeling that maybe I had flexed the flange back and forth a bit too much in the effort of getting something in there to get a good dimple. Maybe it would have been fine to build on but I decided to go ahead and order a new rib now that I had a way of dimpling in that narrow space.
I received the rib to discover the aft 6 holes were already drilled and dimpled! Nice!
I received the rib to discover the aft 6 holes were already drilled and dimpled! Nice!