Folks,
My O-320-D1A came with an oil line for a constant speed prop, from the oil pump on the aft accessories pad to a fitting in the fwd crankcase.
As I am fitting a fixed pitch prop I have removed this oil line & blanked the fwd (crankcase) end with an NPT plug.
My question is. What hardware are you all using to blank the aft accessories end? My proposal is to blank the existing Lycoming 45 degree outlet elbow with an AN929-L6K Cap & lockwire this cap to the engine.
Grateful for your feedback.
Graham
New Zealand.
My O-320-D1A came with an oil line for a constant speed prop, from the oil pump on the aft accessories pad to a fitting in the fwd crankcase.
As I am fitting a fixed pitch prop I have removed this oil line & blanked the fwd (crankcase) end with an NPT plug.
My question is. What hardware are you all using to blank the aft accessories end? My proposal is to blank the existing Lycoming 45 degree outlet elbow with an AN929-L6K Cap & lockwire this cap to the engine.
Grateful for your feedback.
Graham
New Zealand.