Last week I was assembling my wing skeleton an drilling the ribs and spars. Some ribs and spar holes don't align so you have to use the spar as a drill guide. All goes well with the main rib and rear spar, I then walk around the assembly and drill the leading edge holes.. I then notice but only in the evening is that I drilled from the rib side into the spar and added nice new holes into the spar. Silly me!!!
http://www.notreavion.net/modules/weblog/details.php?blog_id=108?sel_lang=english
I send the picture to Vans, but did not get an answer for the time being. They must still be rolling on the floor laughing, or maybe it's a real show-stopper and they have to have a big meeting to decide what to do about this.
Well, I stored my drill and undertook house renovation while waiting.
http://www.notreavion.net/modules/weblog/details.php?blog_id=108?sel_lang=english
I send the picture to Vans, but did not get an answer for the time being. They must still be rolling on the floor laughing, or maybe it's a real show-stopper and they have to have a big meeting to decide what to do about this.
Well, I stored my drill and undertook house renovation while waiting.