I have a 5/16 rubber type fuel hose. What size of fire sleeve should I purchase to cover it?
Last edited:
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Fire sleeve size?
- Thread starter rvator4twa
- Start date
jetmech
Well Known Member
fire sleeve size
Aloha Ron,
measure the OD of the hose you want to cover and order the closes size to it in fire sleeve slightly bigger in ID so it will slide on- don't forget to seal & clamp the ends when done
Lee
http://www.aircraftspruce.com/catalog/appages/aqfiresleeve.php
Aloha Ron,
measure the OD of the hose you want to cover and order the closes size to it in fire sleeve slightly bigger in ID so it will slide on- don't forget to seal & clamp the ends when done
Lee
http://www.aircraftspruce.com/catalog/appages/aqfiresleeve.php
Ron---Stratoflex 2650-8 will fit snuggly on the hose hose.
Tom
Tom
Fire sleeve size
Thanks for the help.
Thanks for the help.
Stockmanreef
Well Known Member
any idea where to purchase the stuff in this kit? I don't need the pass thru ports, but would like all the silicone sleeves, fabric and tape.
https://www.aircraftspruce.com/pages/el/tubing/ssfirewallkit12-04762.php
https://www.aircraftspruce.com/pages/el/tubing/ssfirewallkit12-04762.php
