VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Prev Previous Post   Next Post Next
  #1  
Old 09-21-2017, 04:05 PM
DonFromTX's Avatar
DonFromTX DonFromTX is offline
 
Join Date: Oct 2010
Location: La Feria Texas
Posts: 3,640
Default Pin Style Prop Settings

I sent my Sensenich two blade prop back to Sensenich for upgrade to the new hub and settings. Essentially you are furnished a set of pins which you stick in a hole of the new hub, then rotate the blade until the newly installed pins installed by Sensenich contacts.
I cannot find anyone in the archives that has done this, and I was wondering how well this new method gets the blades equal with each other, and which pin others have found to result in the most favorable pitch.
__________________
AF1 (was RV12) EAB Air Force One, SN 461, N461DG VIKING/HONDA ENGINE POWERED! AND N756TS ROTAX POWERED
A&P, PP-SEL, Pathological Flier, EAA Technical Counselor
EAA Chapter 595 President,http://www.595.eaachapter.org/index.htm
Retired US Army Officer
http://www.mykitlog.com/users/index....X&project=1903
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:40 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.