VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-29-2018, 07:03 AM
magiccarpet's Avatar
magiccarpet magiccarpet is offline
 
Join Date: Feb 2013
Location: Switzerland, Europe
Posts: 155
Default Flying with or without wing tie down rings

A quick question to all flying RV-12 drivers. Do you fly with the wing tie down rings attached, or do you always remove them before flying?
What is best practice here?
Thanks a lot
Chris
__________________
Chris, RV-12 HB-YSC
acceptance procedure in progress

Facebook: http://www.facebook.com/magic.carpet.aviation
12-Town:http://12town.com/profile/Chris
=VAF= dues paid for 2018
Reply With Quote
  #2  
Old 07-29-2018, 07:32 AM
rgmwa rgmwa is offline
 
Join Date: Feb 2010
Location: Perth, Western Australia
Posts: 1,591
Default

I remove them. Probably not much chance that they would work loose and fall out but why risk it? Less drag too, although it wouldn't be noticeable. Should add that I don't often use them as my plane is nearly always hangared.
__________________
rgmwa
120346

Last edited by rgmwa : 07-29-2018 at 03:49 PM.
Reply With Quote
  #3  
Old 07-29-2018, 07:52 AM
DaleB's Avatar
DaleB DaleB is offline
 
Join Date: Sep 2012
Location: Omaha, NE (KMLE)
Posts: 1,856
Default

I only tie down on rare occasions, so I install when needed and normally have them in the glove box. So far, in fact, I think I've only used them at Oshkosh. The rest of the time I just chock the nose wheel. I'm generally never parked outside fo the hangar for more than a few hours.
__________________
Dale
Omaha, NE
RV-12 # 222 N980KM "Screamin' Canary" (bought flying)
Fisher Celebrity (under construction)
Previous RV-7 project (sold)
-=VAF=- 2017 dues paid
Reply With Quote
  #4  
Old 07-29-2018, 08:19 AM
n74846 n74846 is offline
 
Join Date: Sep 2015
Location: Boca Raton, FL BCT
Posts: 102
Default

I'm one of the unlucky hangerless owners in SoFla. and tie down. I never remove for flight and do not see airspeed reduction or risk of loss in flight.
__________________
Steve at BCT
Flying a built ELSA
Reply With Quote
  #5  
Old 07-29-2018, 08:24 AM
snopercod's Avatar
snopercod snopercod is offline
 
Join Date: Aug 2016
Location: Asheville, NC
Posts: 1,262
Default

Once I forgot to remove them and accidentally flew several hundred miles in my Lancair with them hanging down in the breeze. I didn't notice any difference in performance, but did add "Check tiedown rings removed" to my preflight checklist.
__________________
(2018 dues paid)
Reply With Quote
  #6  
Old 07-29-2018, 02:13 PM
RFSchaller RFSchaller is online now
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 2,269
Default

I only remove mine at annual when I install hex head bolts as jack points to jack up one wing at a time for wheel and brake maintenance. I bought a tall hydraulic jack from Nortern Hydraulics and machined a cup on one end of a 2 OD AL bar for the jacking bolt hex head. I bored the other end of the bar to slip over the end of the hydraulic jack shaft. The AL bar is about 4 long. Works great.
Reply With Quote
  #7  
Old 07-29-2018, 04:42 PM
N941WR's Avatar
N941WR N941WR is online now
 
Join Date: Jan 2005
Location: SC
Posts: 11,377
Default

Remove the steel rings from the aluminum fittings.

That would be a hint.
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html
Reply With Quote
  #8  
Old 07-30-2018, 08:15 AM
benfra benfra is offline
 
Join Date: May 2007
Location: ft MYERS, FL Based @KPGD
Posts: 7
Thumbs up tie down rings

Good Hint! Yes electralisis still exists!
Reply With Quote
  #9  
Old 07-30-2018, 10:06 AM
RFSchaller RFSchaller is online now
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 2,269
Default

Would that include all bolts in the airplane?😜
Reply With Quote
  #10  
Old 07-30-2018, 10:16 AM
rocketman1988 rocketman1988 is offline
 
Join Date: Jun 2010
Location: Sunman, IN
Posts: 963
Default And...

Yep, better remove any dissimilar junctions throughout the airplane!
__________________
Bob
Aerospace Engineer '88

RV-10
Structure - 90% Done
Cabin Top - Aaarrghhh...
Doors - Done
On Gear
290 HP Barrett Hung
ShowPlanes Cowl with Skybolts Fitted - Beautiful

Dues Paid 2017,...Thanks DR+
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:40 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.